Step aboard this newly listed 2013 Sabre 48 SE. The color of SERENITY awlgrip blue was done in 20202. This vessel is a 2 stateroom 2 head layout along with crew quarters. SERENITY is powered by a matched set of 550mph Cummins MerCruiser QSC8.3-550 diesels with 889 hours and has all the bells and whistles. She has auto pilot cummins Zeus 3800 pod drives along with joystick, VHF Icom IC-M504, 2 Garmin GPS Map 7215 chartplotter, Smartcraft Vessel View, Jabsco searchlight, quick chain/ tode counter and fusion stereo. The Sabre 48 SE was designed to maximize the onboard interior space. On the exterior and deck of Serenity, she has teak decking in cockpit along with the steps, electric sunroof with sunscreen in lieu of standard two pilot hatches and FRP molded mast, separate
radar platform and satellite pads for sedan hardtop.
EXTERIOR AND DECK
*FRP molded mast, separate radar platform & satellite pad(s)for sedan hardtop
*Teak decking in aft cockpit including steps
*Electric sunroof with sunscreen in lieu of standard two (2) pilot hatches
* Additional 12 volt DC outlet (1) (One standard at helm) Additional
one in Cockpit. Install standard 12V outlet into custom cherry box at helm
*Additional dimmer switches (1) (Salon is standard) master stateroom
* Inverter/charger 3000 watt true sine wave with remote control
*2nd Shorepower inlet at bow with 25 foot cord set
*Beam central vac system with (2) outlets and a 32' expandable hose
*Underwater LED light package (3) at transom. Blue
*Dark hull colors
*Anti-skid color (fore & side decks, coach roof, aft cockpit, and recessed area of swim platform)
*Crew quarters with head in lieu of standard utlility room
*Drawer type freezer with fridge above in lieu of standard
*Shoji panel in lieu of fixed cherry panel aft of passageway doors to master SR
*Accord Shades on all opening ports
*Ultraleather upholstery main salon
*Reverso oil change system
*Kahlenberg dual chrome horns
*Searchlight dual beam mounted on hardtop mast
*Hot and cold transom shower
*Fresh water wash down forward
*Shore water inlet
*Single Seagull water purifier on galley cold water plumbed to separate spigot
*Kraus model #KHU101-23 single sink in lieu of standard sink & prep sink. KPF 1622 faucet & KSD30CH soap dispenser in lieu of std faucet, Provide Corian split two piece cover stored under cutting board.
*Single Seagull water filter plumbed to dedicated Seagull drinking water faucet at galley sink.
*Installed a door on small open locker in galley.
*Changed glass cabinet in aft galley to one acrylic shelr in lieu of one hanging
MASTER CABIN AND MASTER HEAD
*Upgrade master stateroom mattress w/memory foam topper
*Cherry panels on hanging locker doors on each side of master berth w/ mullions in lieu of shoji locker doors
*Shelf inside of master wet locker (starboard) sitting on molded notch.
*Fabric for standard roman shade in master: ADO 1093 1/76
*Install a tall mirror recessed (no frame) into the bulkhead behind master head shoji door
*Add a key lock to one of the top drawers in master cabin.
GUEST CABIN AND GUEST HEAD
*Upgrade guest stateroom mattress w/memory foam topper
*Shoji door on forward cabin in lieu of standard
*Wet bar in salon starboard side settee forward including drawer refrigerator DR49 (no sink or trash) w/inlay on top to coordinate with main salon table with hi-gloss
*Custom color on Oceanaire blinds: Pebbles Ivory
*OceanAir pleated blinds for windshield (starboard window shade will not fully close and will hit cabinetry): Pebbles Ivory
*Curved window curtain fabric: Ado #1/76
* Add a single cup holder (2) (port and stbd) on the shelf behind the curved windows in the main salon *Install a 45" Stidd bench seat at helm in lieu of std Stidd seat
*Add two cherry drop in boxes on port side of helm pod face one on top of the other. Top one to be rectangular with inside opening 6H"x8W"x10"D. Make the bottom cherry box as large as possible and install the std 12V outlet in this box. Fusion Stereo head to be installed between the two boxes
* Salon table extension to accommodate sliding port settee. Add 2" on base table top and 1" on each table leaf (overall 4" wider), Slide on table set up to slide diagonally from forward stbd position to aft port position.