Mako – 264 Center Console

New Jersey, United States

Need to sell, Ready to go and open to reasonable Offers!

26′ 2008 Mako (264 CC Model)

Powered by Twin 175 HP Evinrude E-Tecs with approx 1100 Well-Maintained hours (Fully serviced this season by certified Evinrude mechanic)

No Trailer!

Always Lift Kept & Never Bottom Painted

-Equipped w/ Complete Garmin system

-Daul Garmin 7610xsv touch screens

-Radar (Garmin) Sonar ,Transducer and Radio

-New Canvas and T Top (Installed 2021)

-Taco outriggers (2021)

-Sea deck teak flooring throughout the boat. (2022)

-Fusion stereo with JL audio speakers.

-Fresh water holding tank with multiple sinks and wash down

-Vacuflush head with holding tank

All ready for the water and Fishing!! 



Basic Boat Info

Boat Hull ID
Has Hull ID


26 ft
Length Overall
26 ft
9.17 ft
Max Draft
1.67 ft
Dry Weight
4,500 lb

Engines / Speed

Engine #1 Specs:
  • Make : Evinrude
  • Model : E-Tec
  • Fuel : Unleaded
  • Engine Power : 175 hp
  • Type : Outboard 2 Stroke
Engine #2 Specs:
  • Make : Evinrude
  • Model : E-Tec
  • Fuel : Unleaded
  • Engine Power : 175 hp
  • Type : Outboard 2 Stroke
Total Engine Power
350 hp


Fuel Tanks
Fuel Tank Capacity
194 gal


Heads Count
Boat Class
Center Consoles, Freshwater Fishing

Additional Info

Manufacturer Provided Description
With the power to handle heavy seas and the rugged, good looks MAKO is famous for, the 264 Center Console has the size and speed needed in open waters. Built in the MAKO tradition, it boasts a ÔøΩtougher-than-nailsÔøΩ disposition, a smooth, dry ride and a long list of standard equipment. An aggressive V hull is combined with a bow layout that offers maximum usable deck space without sacrificing storage. A one-piece, foam-injected fiberglass stringer grid enhances strength and rigidity. An optional, custom-matched aluminum trailer with oil bath hubs and sealed-circuit LED lights is also available. This may be our finest 26-foot center console yet.
Additional Specs
  • Length: 26' 0"
  • Beam: 9' 2"
  • Transom Height: 30"
  • Max. Recommended HP each (Twin): 225 HP
  • Max. Person Capacity: 11 Persons
  • Max. Person Weight: 3693 Lbs.
  • Hull Weight (approx.): 4500 Lbs.
  • Max. Cumulative Engine Weight: 1300 Lbs.
  • Fuel Capacity: 194 Gallons
  • Deadrise: 21 degrees
  • Draft: 20"

Standard Features
  • Drink holders
  • Forward console seat w/28-qt. insulated cooler w/overboard drain
  • Console grab rail
  • Console storage space w/ventilated door, stainless steel latch
  • Heavy-duty electrical switching system, battery selector switch, main power
  • Recessed switch panel
  • Recessed ignition switch
  • Battery storage
  • Dual battery rigging for twin engines
  • Gauge panel w/analog gauges
  • Console sink
  • Glass windscreen
  • Head enclosure w/molded headliner, porta potti, portlight
  • Marine-grade wiring w/submersible connectors
Console and Deck
  • Anchor locker
  • Foredeck dodger mounting boss
  • Leaning post backrest
  • Drink box under console seat
  • Bilge access hatch w/removable door
  • Low-profile aluminum bow rail
  • Bait prep station w/baitwell, tackle tray storage & sink
  • Gunwale-mount rod holders w/custom logo
  • Remote oil fill w/2-stroke engine pre-rig
  • Port & starboard forward seats w/storage below
  • Transom door w/latch
  • Forward V-shaped bow seating provides easy anchor access
  • Molded-in swim platform, port and starboard
  • Under-gunwale rod storage, port and starboard, for 6 rods
  • 20-gallon transom baitwell w/standpipe and overboard drain
  • 35-gallon leaning post baitwell/bait station w/tackle storage, sink & 2 rod holders
  • 64" fishbox, aft cockpit in-deck, insulated, w/overboard drain
  • Aluminum reinforcement for T-top mounting
  • Composite construction throughout
  • Hull/deck joint chemically sealed and bonded 360 degrees
  • Hull/deck joint mechanically fastened every 6" w/stainless steel fasteners
  • Legendary dry-riding MAKO Deep V hull
  • Recessed trim tabs

Engine Notes
Max hp displayed as standard. Various engine options available.

Contact Us

  • This field is for validation purposes and should be left unchanged.